Pole Braces
Our unique patented (U.S. Patent No. 11927026) Pole Brace system consists of a minimum of 2 and up to a maximum of 4 braces depending on the weight for each pole that is being stabilized. The pole braces are first chained or strapped to the base section of a pole. Then, the anchor plates are staked into the ground and the pole is then plumbed by simply extending or retracting the braces. The entire process can be completed in several minutes.
This system enables you to quickly set up, plumb and hold a concrete or steel pole in place during construction, without the use of a forklift/telehandler or deadman concrete anchors. Thus, allowing your company to cut down on man-hours and maximize production and profits.
CLICK FOR RENTAL INFOFeatures
- Long Lifespan / Made of 100% recyclable material (steel)
- Requires no routine maintenance.
- No additional transportation needed.
- Simple, quick and easy-to-use design.
- Can be set up and adjusted in minutes.
- Allows for the reduction of job-site hazards associated with moving equipment.
Specifications
| Total unit weight (Approx.) | 95 lb (43 kg) |
| Working Load Limit Retracted Extended | 9750 lb (4423 kg) 6600 lb (2994 kg) |
| Length Retracted Extended | 7'6'' (2286 mm) 14' (4267 mm) |
| Max. Pole Diameter | 6' (1829 mm) |
| Max. Pole Weight | 30,000 lb (13608 kg) |
| Max. Pole Length | 65' (19812 mm) |
| Min. % Embedded | 60% |
This system will allow you to directly and indirectly cut costs on:
- Equipment rentals and maintenance
- Labor
- Tools i.e. hoists and slings
- Material i.e. rebar and concrete for dead-man anchors.
- Haul truck costs for hauling forklifts or dead-man anchors.
- Fuel costs by eliminating excess equipment.
- Low Reclamation due to less vehicle and equipment traffic.
