TLL-2500
The Triple Line Lifter 2500 is an insulated crane attachment used to support up to 3 energized lines. The TLL-2500 has a maximum capacity of 2500 pounds (1134 kg) per phase with a total capacity of 7500 pounds (3402 kg).
CLICK FOR RENTAL INFOFeatures
- Vertical and horizontal construction
- Hydraulic articulation, extension and retraction
- Handheld radio remote control
- Custom load charts for your crane model(s)
- Manual override control valve
- Holding valves for all cylinders
- Quick attach insulators and wire holders
- Installed at ground level
- Insulators are lab tested (retest every 2 years)
- High strength steel and fiberglass fabrication
- Operation, maintenance and parts manual
Specifications
| Voltage (#) Phases 115 kV (3) phases 138 kV (3) phases 161kV (3) phases 230kV (2) phases 345 kV (2) phases | Capacity per phase 2500 lb (1134 kg)/7500 lb (3402 kg) total 2500 lb (1134 kg)/7500 lb (3402 kg) total 2500 lb (1134 kg)/7500 lb (3402 kg) total 2500 lb (1134 kg)/7500 lb (3402 kg) total 5000 lb (2268 kg) total |
| Total unit weight (Approx.) TLL-2500 with skid TLL-2500 w/o skid | 6000 lb (2722 kg) 7500 lb (3402 kg) |
| Max. Phase Spacing Outside to Outside Center to Outside | 48' (14630 mm) 24' (7315 mm) |
| Min. Phase Spacing Outside to Outside Center to Outside | 20' (6096 mm) 10' (3048 mm) |
| Horizontal Configuration Max Load per Phase | 2500 lb (1134 kg) |
| Vertical Configuration Max Load per Phase | 2500 lb (1134 kg) |
| Insulator | Fiberglass |
| Hydraulic | Yes |
| Mounting | Minimum 80 Ton Crane |
TLL-2500
The TLL-2500 has a 2,500 lb (1134 kg) capacity per phase and is capable of vertical and horizontal construction applications. A hydraulic power unit (HPU) and transportation skid is standard with every TLL-2500. The handheld radio remote allows you to perform all the hydraulic functions: articulation, extension & retraction.
Every Triple Line Lifter comes with a boom tip adapter specifically designed for your crane. The standard configuration spacing between the wire holders is 10 ft (3048 mm) when fully retracted and 24 ft (7315 mm) when fully extended. However, customization options are available. Each insulator comes with a custom fitted vinyl cover held in place with velcro and straps to protect the fiberglass section when not in use.
Hydraulic Power Unit
- Gas Engine 24HP (17897 watt)/electric start
- 130′ (39624 mm) of nonconductive hose (2)
- 2,500psi (17237 kPa) and 10gpm (38 l/min)
- Fork Pockets, 4 lifting rings w/rigging
- Hose reel with power return
Transportation Skid
- Fork Pockets
- Lift Rigging
- Compartments for insulators, wire holders and pins
- 4 corner jacks to level skid to crane
rental options available
Rental Options for the TLL-2500 are available. For more information contact: