Dual Cylinder Pole Puller is a high capacity, hydraulic powered piece of equipment for pulling utility poles up to 26’’ diameter with a force of up to 62 tons (PP-60-XHD model).

The Pole Puller can be set up by one person and grips the pole with cam-action heads.  Featuring built-in fork pockets, lifting points and high strength alloy chains, the pole puller may be used with open-center or closed-center hydraulic systems.The Pole Puller is available in two models (PP-30-HD and PP-60-XHD)

LineWise XHD Pole Puller

Common Specifications:

  • Controls:
    • Utilize controls on power source (skid steer, crane or derrick)
  • Hydraulics
    • Required flow rate 5-15 gpm @ 2,500 psi
    • Storage of hoses on the base (2) 25 ft. long
LineWise Pole Puller On Pole

Problem:  Pulling poles with a single cylinder puller is time consuming to set up.  Once set up, it drives the base plate into the ground or it rolls the chain up the pole every time you try to pull the pole.

Solution:  The LineWise twin cylinder pole puller is easier and safer to set up; the chains hook to the heads (not to the pole).  The cam on the heads of the puller tightens the chains.  24 inches of cylinder stroke means less time is needed to pull poles.

PP-30-HD PP-60-XHD
Performance: Pull (lb.) at 2,500 psi 60,000 Pull (lb.) at 2,250 psi 125,000
Maximum Pole Size: 18” Diameter 56” Circumference 26” Diameter 81” Circumference
Cylinder: Stroke:  24” Bore:  4” Rod:  3” Stroke:  24” Bore:  6” Rod:  4”
Head: Cam action head has beveled teeth to provide a better grip. Chain (2) 1/2” Grade 100  Cam action head has beveled teeth to provide a better grip. Chain (2) 3/4” Grade 100 
Base Weldment: Exterior:  32” x 32” Interior:  20” x 26” Weight:  700 lbs. Exterior:  46” x 46” Interior:  28” x 28” Weight:  1,500 lbs.
Lifting Points: 2 lifting eyes on the head Fork Pockets:  2 1/3” x 5 1/2” x 32” long 2 lifting eyes on the head Fork Pockets:  3 1/4” x 7 1/4” x 46” long