The Triple Line Lifter 1300 is an insulated crane attachment used to support up to 3 energized lines.

The Triple Line Lifter 1300 (TLL-1300) has a 1,300 lb. capacity per conductor and articulates to allow for vertical and horizontal construction applications.  For convenience, the handheld radio remote allows you to perform all the hydraulic functions:  articulation, extension & retraction.

A hydraulic power unit (HPU) and transportation skid is standard with every TLL-1300.  In addition, the transportation skid has dedicated slots for the wireholders, insulators and pins.  

Every Triple Line Lifter 1300 comes with a boom tip adapter specifically designed for your crane.  While on the job, the standard configuration spacing between the wire holders is 6.5 ft when fully retracted and 14.5 ft when fully extended.  However, customization options are available.  Each insulator comes with a custom fitted vinyl cover held in place with velcro and straps to protect the fiberglass section when not in use and during transportation. 

Above all, once your TLL-1300 is ready to be put into service, a LineWise Field Service Manager will provide onsite training for your crew.

Contact LineWise for available options that will suite your application!

If you are needing a Triple Line Lifter tool with a higher capacity, check out the Triple Line Lifter 2500.

LineWise Triple Line Lifter 1300 Vertical Orientationjpg

Specifications:

  • Hydraulic articulation, extension and retraction
  • Conductor spacing:  6.5 – 14.5ft
  • Quick attach insulators and wire holders
    • Field testable insulators
  • Hydraulic functions (4)
  • Vertical and Horizontal Orientation
  • Radio Remote Control
  • Unit Weight = 2,950lbs
    • Mounted in skid = 3,700lbs
  • Voltage (#) ConductorsCapacity (lb) per Conductor
    69kV (3) Conductors1300/3900
    115kV (3) Conductors1300/3900
    138kV (3) Conductors1200/3600
    161kV (3) Conductors1100/3300
    230kV (2) Conductorsconsult factory
LineWise Triple Line Lifter HPU

Hydraulic Power Unit

  • Gas Engine 24HP
  • 2 (130ft) of nonconductive hose
  • 2,500psi and 5gpm
  • Fork Pockets
  • 4 lifting rings w/rigging
LineWise Triple Line Lifter Skid

Transportation Skid

  • Fork Pockets
  • Lift Rigging
  • Compartments for insulators, wire holders and pins
  • 4 corner jacks to level skid to crane
Facebook
Twitter
YouTube
LinkedIn
Instagram